The characteristics of machine 

• The swinging structure and flying knife of the machine can be exchangeable.
• The machine is equipped with Mitsubishi servo system and the diversified roller groove mathematics models are stored inside the system. The user only needs to input the main data and then the system will execute the macro-program automatically. No programming calculation is needed by user.
•  Special cutting knives are used for high-speed cutting and formation in one motion. The rollers processed are in high quality and it is guaranteed that the reinforcement steel is in GB1499-1998 standard dimension and high precision.
• Servo driver is applied (Type£ºMDS-B-SVJ2-10£©with high reliability, stability and without low frequency or vibration etc.
• The processing dimensions for milling head of flying knife and swing milling head can be adjusted according to the outer diameters of rollers respectively and the cutting volume can be adjusted separately. The system can continue the cutting from pause position after the knife is changed during cutting process. The electricity disconnection protection is implemented. 
•  The machine has high automation degree and fine processing precision. The cutting speed is increased dramatically and the operation is convenient and quick etc. With invariable improvement and renovation in product structure, the machine is becoming more and more mature in structure over the years. It can conveniently perform conventional rolling, complex rolling, high-speed steel rolling, processing of crescent groove of tungsten carbide and processing of graphics and trademark etc. The efficiency of conventional roller processing is 80% higher than that of XK9350A.

Max. diameter of processed roller	500mm
Max. length of processed roller	2500mm
Suitable for threaded steel specification	¦µ5-50
Rotation of main milling head shaft	30-3000rpm
Quick swing speed of milling head	0- 1000"/M
Rotation of main shaft of flying knife	0-450rpm/2KW
Conical hole of main head frame shaft	Mo's 5#
Four-claw chuck is used for main head frame shaft	¦µ400
Rotation feeding speed of work piece	2"~600"/M
Fast turning speed of work piece	1000"/M
Min. programming setting	0.01",0.01mm
Control system	Mitsubishi digital control system, Japan
Linked axes (Three  axes)	X,Y,Z
Main motor power	380V/50HZ
Working power of control system	220V/50HZ
Milling head motor power	2.2KW
Motor of cooling pump	90W
Machine dimension(LxWxH)	3850x1350x1400mm
Machine weight	4700kg
Servo motor max. torque (N.m)
X-axis	41.9 N.m
Y-axis	25.4 N.m
Z-axis	25.4 N.m