| MODEL
|
410 | ||
|
410×750 |
410×1000 |
410×1500 | |
| Swing over bed |
410mm(16") | ||
| Swing over cross slide |
224mm | ||
| Swing in gap (diameter x width) |
640×260mm | ||
| Height of center |
205mm | ||
| Distance between centers |
760mm |
1010mm |
1515mm |
| Width of bed |
350mm | ||
| Cutting tool max. Section |
25×25mm | ||
| Total travel of cross slide |
290mm | ||
| Total travel of top slide |
130mm | ||
| Spindle bore |
Φ58mm | ||
| Spindle nose |
D1-6 ORA1-6 | ||
| Spindle morse taper in nose ,in sleeve |
M.T.#6×#4 | ||
| Spindle speeds number |
12 | ||
| Spindle speeds range |
25-2000R.PM | ||
| Leadscrew diameter & thread |
35mm(11/8")4T.P.I /ORpitch 6mm | ||
| Threads imperial pitches |
2-112(60Nos) | ||
| Threads metric pitches |
0.1-14(41Nos) | ||
| Diametral pitches dp |
4-112(50Nos) | ||
| Module pitches mp |
0.1-7(34Nos) | ||
| Longitudinal feeds imperial |
0.001"-0.0633"/Rev.(42Nos) | ||
| Longitudinal feeds metric |
0.031-1.7mm/Rev.(42Nos) | ||
| Imperial/metric cross feeds |
0.033"-0.01837"(42Nos) /0.014-0.784mm | ||
| Total travel of tail stock quill |
150mm | ||
| Tail stock quill diameter |
Φ68mm | ||
| Taper in tail stock quill |
M.T.NO.4 | ||
| Spindle drive motor 4p,3ph |
5HP |
5HP |
7.5HP |
| Coolant pump motor 2p,3ph |
1/8HP(0.1kw) | ||
| Machine space required (LxWxH) |
78"×36"×48" |
88"×36"×48" |
110"×36"×48" |
| Packing case dimensions (LxWxH) |
83"×40"×62" |
93"×40"×62" |
114"×40"×62" |
| Net weigh (kg) |
1760kg |
1935kg |
2285kg |
| Gross weight (kg) |
1969kg |
2185kg |
2535kg |